Vanner RE Series Manuale di Installazione Scaricare il pdf (Pagina 15)

RE Installation Manual

3-10



2001 Phone: (614) 771-2718 RE-4500

Vanner Inc. FAX: 614-771-4904 Owners Manual

4282 Reynolds Dr. www.vanner.com Rev 01e

Hilliard Ohio 43026 RE-Installation_Manual_Rev01e 910157-A

INCORPORATED

INCORPORATEDINCORPORATED

INCORPORATED

Locate a secure, dry, flat vertical surface large enough to

mount the inverter. The location should be as close to the

battery as possible, usually within six feet, but not in the same

compartment and should provide adequate ventilation while

the inverter is operating. The location must be clean, dry, free

of dripping water, snow, or other moisture contamination.

Warning

Allow 12 inches minimum clearance below the RE-4500 for the Fan

to provide adequate cooling.

This will insure that the Inverter does not overheat due to

inadequate airflow.

Wiring connections

Warning

It is important to disconnect ALL DC and AC sources to avoid

electric shock!

DC and AC Voltage is extremely dangerous and contact with DC

and AC Currents can lead to injury, damage to property, and death!

Use the DC and AC disconnects to insure that ALL potentials are

disabled.

All of the inverter’s electrical connections are labeled.

Remove the access covers to the DC and AC raceways as

shown in Figure 3-2 and Figure 3-3.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Nessun commento

Vanner RE Series Manuale di Installazione Pagina 15