Vanner RE Series Manuale di Installazione Scaricare il pdf (Pagina 28)

Installation And Start-Up

3-23



2001 Phone: (614) 771-2718 RE-4500

Vanner Inc. FAX: 614-771-4904 Owners Manual

4282 Reynolds Dr. www.vanner.com Rev 01e

Hilliard Ohio 43026 RE-Installation_Manual_Rev01e 910157-A

INCORPORATED

INCORPORATEDINCORPORATED

INCORPORATED

2223

Front

Right

Left

2021

+VDC

Gnd

ABCD

(48VDC or 24VDC)

Select a location for the inverter. An ideal location is close

to the battery; protected from weather and moisture; and

well ventilated.

Warning

It is important to disconnect ALL DC sources to avoid electric

shock!

DC Voltage is extremely dangerous and contact with DC Currents

can lead to injury, damage to property, and death!

Use the DC disconnect to insure that ALL potentials are disabled.

Select an accessible location for the DC Fuse. The location

should be within 18” of the battery and accessible for

visual inspection and replacement. If possible locate so the

last DC connection can safely be made at the fuse.

Remove the cover plate on the DC cable raceway to expose

the positive and negative DC connections.

Prepare DC cable ends. Use ring terminals or, if using the

optional D08241 Compression Lugs, leave the cable ends

bare.

Verify that the DC cables are still disconnected from the

DC Source.

F 7 Figure 3-7: Inverter DC Raceway Terminations

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 91 92

Nessun commento

Vanner RE Series Manuale di Installazione Pagina 28